Oil Pump IFC 210-3

Z-P 2000 0150

LIGHTWEIGHT: 300 g

COMPACT: 108 x 66.5 x 56 mm including ECU

POWERFUL: up to 3.6 l/min @ 3 bar

This electrically driven high-performance pump with BLDC motor and intelligent control electronics is designed for oil circuits.

The pump head is made of aluminum and works using the gerotor principle. Under the conditions of 80 °C medium and 80 °C ambient temperature, the pump delivers approx. 210 l/h at 3 bar, but the performance is adjustable depending on load condition as well as the temperature of the processor, the ambient environment, and the medium.

By integrating the control unit into one housing together with the pump head, we can offer a compact and lightweight pump unit that can be flexibly mounted in the installation space.

Details:

  • Pump: Displacement pump (gerotor), self-priming
  • Engine: BLDC, external rotor
  • Motor control: Self-sensing
  • Control electronics: Customer-specific interfaces (CAN, LIN, UART, etc.), alternatively, ON/OFF
  • Software:
    • Intelligent performance control depending on load status, processor temperature and ambient/medium temperature
    • To integrate our product into the CAN vehicle architecture, we automatically supply the DBC-file if required
  • Hydraulic connections: Push-in fitting with retaining plate according to customer specification
  • Electric connections: Souriau 8STA0 12-26 PN, on vehicle side 8STA6 12-26 SN
  • Mounting: 4 M4 screws

Measurements:

  • Length: 108 mm
  • Width: 66.5 mm
  • Height: 56 mm (with electric connection: 70 mm)

Oil Pump IFC 1200-3

Z-P 2000 0066

LIGHTWEIGHT: 1200 g

COMPACT: 142 x 101 x 90 mm including ECU

POWERFUL: up to 20 l/m @ 3 bar

This electrically driven high-performance pump with BLDC motor and intelligent control electronics is designed for oil circuits.

The pump head is made of aluminum and works using the gerotor principle. Under the conditions of 80 °C medium and 80 °C ambient temperature, the pump delivers 1200 l/h at 3 bar, but the performance is adjustable depending on load condition as well as the temperature of the processor, the environment, and the medium.

By integrating the control unit into one housing together with the pump head, we can offer a compact and lightweight pump unit that can be flexibly mounted in the installation space.

Details:

  • Pump: Gerotor pump
  • Engine: BLDC, external rotor
  • Motor control: Sensored or self-sensing
  • Control electronics: Customer-specific interfaces (CAN, LIN, UART, etc.), alternatively, ON/OFF
  • Software:
    • Intelligent performance control depending on load status, processor temperature and ambient/medium temperature
    • To integrate our product into the CAN vehicle architecture, we automatically supply the DBC-file if required
  • Hydraulic connections: -12 JIC (other connections available)
  • Electric connections: Souriau 8STA0 12-26 PN, on vehicle side 8STA6 12-26 SN
  • Mounting: 4 M6 screws

Measurements:

  • Length: 142 mm (without electrical connection)
  • Width: 101 mm (with mounting tabs, without hydraulic connections)
  • Height: 90 mm

Oil Pump IFC 540-3 for transmission cooling

Z-P 2000 0051

Electrically driven high-performance pump designed for transmission oil cooling with BLDC-motor and intelligent control electronics (IFC = Intelligent Flow Control). At the condition of 120 °C medium and 80 °C ambient temperature the pump delivers 540 l/h at 3 bar. Still, the performance data is adjustable depending on load condition, processor, and ambient/medium temperature.

All pumps are optimized to the customer-specific operating point to enhance efficiency (e.g., by calculating the optimal motor winding).

Details:

  • Pump: Displacement pump (gerotor)
  • Engine: BLDC internal rotor
  • Motor control: Sensored or self-sensing
  • Control electronics: Customer-specific interfaces (CAN, LIN, UART, etc.), alternatively, ON/OFF
  • Software:
    • Intelligent performance control depending on load status, processor temperature and ambient/medium temperature
    • To integrate our product into the CAN vehicle architecture, we automatically supply the DBC-file if required
  • Hydraulic connections:-08 Wiggins tube connectors (other connections, e.g., JIC available)
  • Electric connections: Souriau plug according to customer requirements

Small PEEK Pump for Electric Powertrains

Z-P 2000 0600 – PEEK Pump IFC 1100-2

LIGHTWEIGHT: 660 g

COMPACT: 107 x 92 x 81 mm including ECU

POWERFUL: 19 l/min @ 2 bar

We proudly present our new member in our PEEK Pump Family: The little sister completes our PEEK pump product series. This electrically driven high-performance pump with BLDC motor and intelligent control electronics is also designed for water circuits or circuits with dielectric media.

The pump head is made of PEEK to avoid metallic abrasion (gerotor outrunner made of TECA PEEK). PEEK is a high-performance material with exceptional properties such as high wear, chemical and moisture resistance combined with high strength, dimensional stability, and stiffness. It is the material of choice for aggressive environments such as high temperatures, wet processes, and heavy loads. This makes the pump ideal for use within electric powertrains. Of course, this pump can also be used for secondary circuits of combustion engines.

By integrating the control unit into one housing together with the pump head, we can offer a very compact and lightweight pump unit that can be flexibly mounted in the installation space.

Details:

  • Pump: Displacement pump (gerotor)
  • Engine: BLDC, external rotor
  • Motor control: Sensored or self-sensing
  • Control electronics: Customer-specific interfaces (CAN, LIN, UART, etc.), alternatively, ON/OFF
  • Software:
    • Intelligent performance control depending on load status, processor temperature and ambient/medium temperature
    • To integrate our product into the CAN vehicle architecture, we automatically supply the DBC-file if required
  • Hydraulic connections: -08 Wiggins tube connectors (other connections, e.g. JIC available)
  • Electric connections: 8STA0 10-98 PN, on vehicle side 8STA6 10-98 SN
  • Mounting: 3 M5 screws

Measurements:

  • Length: 107 mm
  • Width: 92 mm
  • Height: 81 mm

PEEK Pump for Electric Powertrains

Z-P 2000 0400 – PEEK Pump IFC 1100-3

LIGHTWEIGHT: 750 g

COMPACT: 117 x 92 x 89 mm including ECU

POWERFUL: 19 l/min @ 3 bar

This is the new version of the already known PEEK pumps 1080-2 and 800-3. We made the pump much lighter and significantly increased the performance.

This electrically driven high-performance pump with BLDC motor and intelligent control electronics is designed for water circuits or circuits with dielectric media.

The pump head is made of PEEK to avoid metallic abrasion (gerotor outrunner made of TECA PEEK). PEEK is a high-performance material with exceptional properties such as high wear, chemical and moisture resistance combined with high strength, dimensional stability, and stiffness. It is the material of choice for aggressive environments such as high temperatures, wet processes, and heavy loads. This makes the pump ideal for use within electric powertrains. Of course, this pump can also be used for secondary circuits of combustion engines.

By integrating the control unit into one housing together with the pump head, we can offer a very compact and lightweight pump unit that can be flexibly mounted in the installation space.

Details:

  • Pump: Displacement pump (gerotor)
  • Engine: BLDC, external rotor
  • Motor control: Sensored or self-sensing
  • Control electronics: Customer-specific interfaces (CAN, LIN, UART, etc.), alternatively, ON/OFF
  • Software:
    • Intelligent performance control depending on load status, processor temperature and ambient/medium temperature
    • To integrate our product into the CAN vehicle architecture, we automatically supply the DBC-file if required
  • Hydraulic connections: -08 Wiggins tube connectors (other connections, e.g. JIC available)
  • Electric connections: 8STA0 12-26 PN, on vehicle side 8STA6 12-26 SN
  • Mounting: 3 M5 screws

Measurements:

  • Length: 117 mm
  • Width: 92 mm
  • Height: 89 mm

PEEK Pump EWOC 2400-3 for water/glycol or KERS oil

Z-P 2000 0250 Gerotor Pump IFC EWOC 2400-3

The evolution of our PEEK Pump Family: Our Big Daddy delivers up to 2400 l/h at 3.0 bar at the condition of 50 °C medium and ambient temperature. The performance data is adjustable depending on load condition, processor and ambient/medium temperature.

All pumps are optimized to the customer-specific operating point to enhance efficiency (e.g. by calculating the optimal motor winding).

This electrically driven high-performance pump is designed for water/glycol or KERS oil with BLDC motor and intelligent control electronics. The pump head is made of PEEK to avoid metallic abrasion (gerotor outrunner made of TECA PEEK). PEEK is a high-performance material with exceptional properties such as high wear, chemical and moisture resistance combined with high strength, dimensional stability and stiffness. It is the material of choice for aggressive environments such as high temperatures, wet processes, and heavy loads.

Details:

  • Pump: Displacement pump (gerotor), self-priming
  • Engine: BLDC external rotor
  • Motor control: Sensored or self-sensing
  • Control electronics: Customer-specific interfaces (CAN, LIN, UART, etc.), alternatively, ON/OFF
  • Software:
    • Intelligent performance control depending on load status, processor temperature and ambient/medium temperature
    • To integrate our product into the CAN vehicle architecture, we automatically supply the DBC-file if required
  • Hydraulic connections: -16 Wiggins tube connectors (other connections, e.g. JIC available)
  • Electric connections: Souriau 8STA0 16-20 PN, on vehicle side 8STA6 16-20 SN

Mini oil pump triple gear, 12 V

H-P 2000 0111: Pump without cables

Z-P 2000 0111: Straight cable 
Z-P 2000 0112: 90° cable 

This mini pump is made to transfer engine oil from a separate oil tank to the engine dry sump tank.
The driver controls the oil flow with a trigger if the oil level control warns a low level.
The car does not need to stop. Refill the oil on the race track and save time.

Special gear oil pump 3-540 for cooling circuit

Z-P 6000 0004

Oil pump series 04: 04-650 and 04-900

Z-P 6000 0003

  • 12V power supply
  • Flow 650 l/h @ 1 bar pressure
  • Max. operating temperature 120°C

FORM
• Weight 2.195 g

FIT
• In: M22x1,5
• Out: M18x1,5


Z-P 6000 0005

  • 12V power supply
  • Flow 900l/h @ 1bar pressure
  • Max. operating temperature 120°C

FORM
• Weight 2.288 g

FIT
• In: M22x1,5
• Out: M18x1,5