Gerotor Pump IFC 210-3

Z-P 2000 0150 – Gerotor Pump IFC 210-3

LIGHTWEIGHT: 300 g

COMPACT: 108 x 66.5 x 56 mm including ECU

POWERFUL: up to 3.6 l/min @ 3 bar

This electrically driven high-performance pump with BLDC motor and intelligent control electronics is designed for oil circuits.

The pump head is made of aluminum and works using the gerotor principle. Under the conditions of 80 °C medium and 80 °C ambient temperature, the pump delivers approx. 210 l/h at 3 bar, but the performance is adjustable depending on load condition as well as the temperature of the processor, the ambient environment, and the medium.

By integrating the control unit into one housing together with the pump head, we can offer a compact and lightweight pump unit that can be flexibly mounted in the installation space.

Details:

  • Pump: Displacement pump (gerotor), self-priming
  • Medium: Oil, dielectric media
  • Engine: BLDC, external rotor
  • Motor control: Self-sensing
  • Control electronics: Customer-specific interfaces (CAN, LIN, UART, etc.), alternatively, ON/OFF
  • Software:
    • Intelligent performance control depending on load status, processor temperature and ambient/medium temperature
    • To integrate our product into the CAN vehicle architecture, we automatically supply the DBC-file if required
  • Hydraulic connections: Push-in fitting with retaining plate according to customer specification
  • Electric connections: Souriau 8STA0 12-26 PN, on vehicle side 8STA6 12-26 SN
  • Mounting: 4 M4 screws

Measurements:

  • Length: 108 mm
  • Width: 66.5 mm
  • Height: 56 mm (with electric connection: 70 mm)

PEEK Pump IFC 600-3 for Electric Powertrains

Z-P 2000 0800 – PEEK Pump IFC 600-3

LIGHTWEIGHT: 310 g

COMPACT: 118 x 80 x 62 mm including ECU

POWERFUL: 10 l/min @ 3 bar

This electrically driven high-performance pump with BLDC motor and intelligent control electronics is designed for water circuits or circuits with dielectric media.

The pump head is made of PEEK to avoid metallic abrasion (gerotor outrunner made of TECA PEEK). PEEK is a high-performance material with exceptional properties such as high wear, chemical, and moisture resistance combined with high strength, dimensional stability, and stiffness. It is the material of choice for aggressive environments such as high temperatures, wet processes, and heavy loads. This makes the pump ideal for use within electric powertrains. Of course, this pump can also be used for secondary circuits of combustion engines.

By integrating the control unit into one housing together with the pump head, we can offer a very compact and lightweight pump unit that can be flexibly mounted in the installation space.

Details:

  • Pump: Displacement pump (gerotor)
  • Medium: Oil, dielectric media, water
  • Engine: BLDC, external rotor
  • Motor control: Sensored or self-sensing
  • Control electronics: Customer-specific interfaces (CAN, LIN, UART, etc.), alternatively, ON/OFF
  • Software:
    • Intelligent performance control depending on load status, processor temperature, and ambient/medium temperature
    • To integrate our product into the CAN vehicle architecture, we automatically supply the DBC-file if required
  • Hydraulic connections: -08 Wiggins tube connectors (other connections, e.g., JIC available)
  • Electric connections: 8STA0 10-98 PN, on vehicle side 8STA6 10-98 SN
  • Mounting: 4 M4 screws

Measurements:

  • Length: 118 mm
  • Width: 80 mm
  • Height: 62 mm

Gerotor Pump IFC 600-1

Z-P 2000 0900 – Gerotor Pump IFC 600-1

LIGHTWEIGHT: 375 g

COMPACT: 100 x 80 x 62 mm including ECU

POWERFUL: up to 10 l/min @ 1 bar

This electrically driven high-performance pump with BLDC motor and intelligent control electronics is designed for oil circuits.

The pump head is made of aluminum and works using the gerotor principle. Under the conditions of 80 °C medium and 80 °C ambient temperature, the pump delivers approx. 600 l/h at 1 bar, but the performance is adjustable depending on load condition as well as the temperature of the processor, the ambient environment, and the medium.

By integrating the control unit into one housing together with the pump head, we can offer a compact and lightweight pump unit that can be flexibly mounted in the installation space.

Details:

  • Pump: Displacement pump (gerotor), self-priming
  • Medium: Oil, dielectric media
  • Engine: BLDC, external rotor
  • Motor control: Self-sensing
  • Control electronics: Customer-specific interfaces (CAN, LIN, UART, etc.), alternatively, ON/OFF
  • Software:
    • Intelligent performance control depending on load status, processor temperature and ambient/medium temperature
    • To integrate our product into the CAN vehicle architecture, we automatically supply the DBC-file if required
  • Hydraulic connections: -08 JIC (other connections available)
  • Electric connections: Souriau 8STA0 12-26 PN, on vehicle side 8STA6 12-26 SN
  • Mounting: 4 M4 screws

Measurements:

  • Length: 100 mm (with electric connection: 113 mm)
  • Width: 80 mm (with -08 JIC: 108 mm)
  • Height: 62 mm

PEEK Pump IFC 1100-2 for Electric Powertrains

Z-P 2000 0600 – PEEK Pump IFC 1100-2

LIGHTWEIGHT: 660 g

COMPACT: 107 x 92 x 81 mm including ECU

POWERFUL: 19 l/min @ 2 bar

We proudly present our new member in our PEEK Pump Family: The little sister completes our PEEK pump product series. This electrically driven high-performance pump with BLDC motor and intelligent control electronics is also designed for water circuits or circuits with dielectric media.

The pump head is made of PEEK to avoid metallic abrasion (gerotor outrunner made of TECA PEEK). PEEK is a high-performance material with exceptional properties such as high wear, chemical and moisture resistance combined with high strength, dimensional stability, and stiffness. It is the material of choice for aggressive environments such as high temperatures, wet processes, and heavy loads. This makes the pump ideal for use within electric powertrains. Of course, this pump can also be used for secondary circuits of combustion engines.

By integrating the control unit into one housing together with the pump head, we can offer a very compact and lightweight pump unit that can be flexibly mounted in the installation space.

Details:

  • Pump: Displacement pump (gerotor)
  • Medium: Oil, dielectric media, water
  • Engine: BLDC, external rotor
  • Motor control: Sensored or self-sensing
  • Control electronics: Customer-specific interfaces (CAN, LIN, UART, etc.), alternatively, ON/OFF
  • Software:
    • Intelligent performance control depending on load status, processor temperature and ambient/medium temperature
    • To integrate our product into the CAN vehicle architecture, we automatically supply the DBC-file if required
  • Hydraulic connections: -08 Wiggins tube connectors (other connections, e.g. JIC available)
  • Electric connections: 8STA0 10-98 PN, on vehicle side 8STA6 10-98 SN
  • Mounting: 3 M5 screws

Measurements:

  • Length: 107 mm
  • Width: 92 mm
  • Height: 81 mm

PEEK Pump IFC 1100-3 for Electric Powertrains

Z-P 2000 0400 – PEEK Pump IFC 1100-3

LIGHTWEIGHT: 750 g

COMPACT: 117 x 92 x 89 mm including ECU

POWERFUL: 19 l/min @ 3 bar

This is the new version of the already known PEEK pumps 1080-2 and 800-3. We made the pump much lighter and significantly increased the performance.

This electrically driven high-performance pump with BLDC motor and intelligent control electronics is designed for water circuits or circuits with dielectric media.

The pump head is made of PEEK to avoid metallic abrasion (gerotor outrunner made of TECA PEEK). PEEK is a high-performance material with exceptional properties such as high wear, chemical and moisture resistance combined with high strength, dimensional stability, and stiffness. It is the material of choice for aggressive environments such as high temperatures, wet processes, and heavy loads. This makes the pump ideal for use within electric powertrains. Of course, this pump can also be used for secondary circuits of combustion engines.

By integrating the control unit into one housing together with the pump head, we can offer a very compact and lightweight pump unit that can be flexibly mounted in the installation space.

Details:

  • Pump: Displacement pump (gerotor)
  • Medium: Oil, dielectric media, water
  • Engine: BLDC, external rotor
  • Motor control: Sensored or self-sensing
  • Control electronics: Customer-specific interfaces (CAN, LIN, UART, etc.), alternatively, ON/OFF
  • Software:
    • Intelligent performance control depending on load status, processor temperature and ambient/medium temperature
    • To integrate our product into the CAN vehicle architecture, we automatically supply the DBC-file if required
  • Hydraulic connections: -08 Wiggins tube connectors (other connections, e.g. JIC available)
  • Electric connections: 8STA0 12-26 PN, on vehicle side 8STA6 12-26 SN
  • Mounting: 3 M5 screws

Measurements:

  • Length: 117 mm
  • Width: 92 mm
  • Height: 89 mm

 Gerotor Pump IFC 540-3 for transmission cooling

Z-P 2000 0051 – Gerotor Pump IFC 540-3

Electrically driven high-performance pump designed for transmission oil cooling with BLDC-motor and intelligent control electronics (IFC = Intelligent Flow Control). At the condition of 120 °C medium and 80 °C ambient temperature the pump delivers 540 l/h at 3 bar. Still, the performance data is adjustable depending on load condition, processor, and ambient/medium temperature.

All pumps are optimized to the customer-specific operating point to enhance efficiency (e.g., by calculating the optimal motor winding).

Details:

  • Pump: Displacement pump (gerotor)
  • Medium: Oil, dielectric media
  • Engine: BLDC internal rotor
  • Motor control: Sensored or self-sensing
  • Control electronics: Customer-specific interfaces (CAN, LIN, UART, etc.), alternatively, ON/OFF
  • Software:
    • Intelligent performance control depending on load status, processor temperature and ambient/medium temperature
    • To integrate our product into the CAN vehicle architecture, we automatically supply the DBC-file if required
  • Hydraulic connections:-08 Wiggins tube connectors (other connections, e.g., JIC available)
  • Electric connections: Souriau plug according to customer requirements

Gerotor Pump IFC 1200-3

Z-P 2000 0066 – Gerotor Pump IFC 1200-3

LIGHTWEIGHT: 1200 g

COMPACT: 142 x 101 x 90 mm including ECU

POWERFUL: up to 20 l/m @ 3 bar

This electrically driven high-performance pump with BLDC motor and intelligent control electronics is designed for oil circuits.

The pump head is made of aluminum and works using the gerotor principle. Under the conditions of 80 °C medium and 80 °C ambient temperature, the pump delivers 1200 l/h at 3 bar, but the performance is adjustable depending on load condition as well as the temperature of the processor, the environment, and the medium.

By integrating the control unit into one housing together with the pump head, we can offer a compact and lightweight pump unit that can be flexibly mounted in the installation space.

Details:

  • Pump: Gerotor pump
  • Medium: Oil, dielectric media
  • Engine: BLDC, external rotor
  • Motor control: Sensored or self-sensing
  • Control electronics: Customer-specific interfaces (CAN, LIN, UART, etc.), alternatively, ON/OFF
  • Software:
    • Intelligent performance control depending on load status, processor temperature and ambient/medium temperature
    • To integrate our product into the CAN vehicle architecture, we automatically supply the DBC-file if required
  • Hydraulic connections: -12 JIC (other connections available)
  • Electric connections: Souriau 8STA0 12-26 PN, on vehicle side 8STA6 12-26 SN
  • Mounting: 4 M6 screws

Measurements:

  • Length: 142 mm (without electrical connection)
  • Width: 101 mm (with mounting tabs, without hydraulic connections)
  • Height: 90 mm

PEEK Pump EWOC 2400-3 for water/glycol or KERS oil

Z-P 2000 0250 – PEEK Pump IFC EWOC 2400-3

The evolution of our PEEK Pump Family: Our Big Daddy delivers up to 2400 l/h at 3.0 bar at the condition of 50 °C medium and ambient temperature. The performance data is adjustable depending on load condition, processor, and ambient/medium temperature.

All pumps are optimized to the customer-specific operating point to enhance efficiency (e.g. by calculating the optimal motor winding).

This electrically driven high-performance pump is designed for water/glycol or KERS oil with BLDC motor and intelligent control electronics. The pump head is made of PEEK to avoid metallic abrasion (gerotor outrunner made of TECA PEEK). PEEK is a high-performance material with exceptional properties such as high wear, chemical and moisture resistance combined with high strength, dimensional stability and stiffness. It is the material of choice for aggressive environments such as high temperatures, wet processes, and heavy loads.

Details:

  • Pump: Displacement pump (gerotor), self-priming
  • Medium: Oil, dielectric media, water
  • Engine: BLDC external rotor
  • Motor control: Sensored or self-sensing
  • Control electronics: Customer-specific interfaces (CAN, LIN, UART, etc.), alternatively, ON/OFF
  • Software:
    • Intelligent performance control depending on load status, processor temperature and ambient/medium temperature
    • To integrate our product into the CAN vehicle architecture, we automatically supply the DBC-file if required
  • Hydraulic connections: -16 Wiggins tube connectors (other connections, e.g. JIC available)
  • Electric connections: Souriau 8STA0 16-20 PN, on vehicle side 8STA6 16-20 SN