SOBEK Motorsporttechnik – electronic, hydraulic and pneumatic high-performance products

Electrical components

Impeller FlowMax Ultimate 90 mm - optimized for high dynamic pressure

Impeller_H-I-4080-1800_4

Z-I 4080 1800

The design of the FlowMax Ultimate is optimized for high dynamic pressure applications. With its BLDC internal rotor it offers significant higher lifetime, weighs less and has a higher efficiency compared to classic DC-motor driven impellers.

The control electronics are integrated into the flow body and provide the following features:

  • Standard ON/OFF
  • Customer specific Intelligent Flow Control (IFC) depending on load condition, processor and ambient temperature available
  • Customer specific interfaces (CAN, LIN etc.) available

Specific preassembled cables and connectors are available according to customer requirements.

Download datasheet (English)
Downlaod datasheet (German)

Brushless Impeller - 52 mm outer diameter

Brushless Impeller - 52 mm outer diameter

Z-I 0050 0010

Life time three times longer, lighter and higher efficiency compared to classic DC-motors.

FORM

  • Weight 176 g
  • Length body 118 mm
  • Material housing carbon fibre / optional glass fibre

FIT

  • Application: Cooling for brakes, electrics, driver or other critical system components

FUNCTION

  • 13,5 VDC / 8,7 A / 167 cbm/h

Download datasheet

Brushless Impeller

Brushless Impeller

Life time three times longer, lighter and higher efficiency compared to classic DC-motors; ECU integrated in flow body.

FORM

  • Weight 90 mm: 252 g, 78 mm: 242 g
  • Length body 120 mm
  • Material housing carbon fibre / optional glass fibre

FIT

  • Application: Cooling for brakes, electrics, driver or other critical system components

FUNCTION
90 mm: Z-I 4080 1316 Flowmax:   13,5 VDC / 9,6 A / 512 cbm/h
90 mm: Z-I 4080 1318 Efficiency: 13,5 VDC / 7,3 A / 470 cbm/h
78 mm: Z-I 4000 1314 Flowmax:   13,5 VDC / 6,6 A / 371 cbm/h
78 mm: Z-I 4000 1316 Efficiency: 13,5 VDC / 5,4 A / 355 cbm/h

Download datasheet (English)
Download datasheet (German)

Impeller

Impeller
Impeller.2

The Sobek Impeller blower, developed 1985, is well experienced in the race car business since decades.
The first piece has been manufactured for the Le Mans cars to breeze cool air into the cockpits.
With a lot of modifications during the years the Impeller blower has now a long lifetime without vibrations.
Cooling applications: Cockpit, critical aggregates, brakes, electronics.

Z-I 4000 4314 78mm standard version
Z-I 4000 1311 78mm high temperature version
Z-I 4080 4311 90mm standard version
Z-I 4080 1310 90mm high temperature version

FIA Emergency Switch G50+

FIA Emergency Switch G50+

Z-I 2005 0050: three-pole datasheet
Z-I 2005 0053: four-pole datasheet

Everything gets destroyed except of this switch: lightweight and leak-proof, no corrosion at switch contacts due to closed system; extremely resilient: 50g+, 99 g, 13.5 VDC

Application: interruption ignition, activation fire extinguisher

Resistance against: oil, hydraulic liquid, alcohol, sand, dust, solvents, fire extinguishing agents


Outboard emergency switch FIA Article 256 ext. 14.5

Outboard emergency switch F.I.A. Article 256 ext. 14.5
Outboard emergency switch F.I.A. Article 256 ext. 14.5.2

Z-I 2005 0010: 2 line: 1xNC 1xNO
Z-I 2005 0015: 4 line: 2xNC 2xNO

Rating at 28V DC
2 line: W100 series 5A inductive load
4 line: W150 series 2A inductive load
Specs: Mil S-8805/3

Datasheet

Float switch

Float switch

Float switch for monitoring liquid levels in tanks.

  • REED technique avoids contact of the medium to conducting components
  • Housing available to attenuate sloshing

Switching: (body colour)
Z-T 0002 0021 NO (blue) – contact closes at rising fluid
Z-T 0002 0022 NC (red) – contact closes at falling fluid

Mass: 38 g
Wire diameter: 2 x AWG 22
Operating temperature range:  -10 bis +60 °C
Float: Nitril

Download datasheet